Dieses Kapitel könnte auch mit "Wie man sein Debian GNU/Linux System sicher upgraded/updated" überschrieben werden, und es verdient hauptsächlich deshalb ein eigenes Kapitel, weil es in kein anderes passt.
Derzeit (Stand Dezember 2001) stellt Debian keine signierten Pakete für die Distribution zur Verfügung und der Woody Release (3.0) wird diese Fähigkeiten nicht integrieren. Es gibt eine Lösung für signierte Pakete, die - hoffentlich - in der nächsten release (sarge) integriert wird.
Der derzeitige (unimplementierte) Plan zur Prüfung von Paket Signaturen mit apt ist:
Durch diese Kette von md5-Summen ist apt in der Lage, zu
verifizieren, dass ein Paket aus einer bestimmten Release stammt. Dies ist
zwar unflexibler als jedes Paket einzeln zu signieren, kann aber auch mit den
unten aufgeführten Plänen kombiniert werden.
Die Signierung von Paketen wurde innerhalb des Debian Projektes
ausführlich diskutiert. Mehr Informationen hierzu finden Sie unter
http://www.debian.org/News/weekly/2001/8/
und http://www.debian.org/News/weekly/2000/11/.
Dieses zusätzliche Schemata jedes paket einzeln zu signieren erlaubt es, Pakete zu prüfen, selbst wenn sie nicht mehr in irgendeiner Packages-Datei erwähnt werden, und auch Pakete von Dritten, für die es keine Packages-Datei gibt, können unter Debian installiert werden.
Dieses Paket-Signierungs Schemata kann durch debsig-verify und
debsigs implementiert werden. Diese beiden Pakete können in
der .deb-Datei selbst eingebettete Signaturen erstellen und prüfen.
Debian hat bereits jetzt die Möglichkeiten dies zu tun, aber das Regelwerk
und die Werkzeuge hierfür werden erst nach dem Woody Release
eingeführt (um den Release-Zyklus nicht zu verlangsamen).
Beachten Sie: Derzeit wird enthält /etc/dpkg/dpkg.cfg derzeit
standardmässig die Option "no-debsig".
Für den Fall, dass Sie nun zusätzliche Sicherheits Prüfungen einführen wollen, können Sie das folgende Skript von Anthony Towns benutzen. Dieses Skript kann automatisch neue Sicherheits Checks durchführen, damit ein Nutzer sicher gehen kann, dass die Software, die er/sie herunterlädt, die gleiche ist, wie die, die von Debian bereitgestellt wird. This stops Debian developers from hacking into someone's system without the accountability provided by uploading to the main archive, or mirrors mirroring something almost, but not quite like Debian, or mirrors providing out of date copies of unstable with known security problems.
Dieser Beispiel-Code, umbenannt nach apt-release-check, sollte auf
die folgende Art benutzt werden: used in the following way:
# apt-get update
# apt-release-check
(... Ergebnisse ...)
# apt-get dist-upgrade
Zuerst müssen Sie jedoch:
http://ftp-master.debian.org/ziyi_key_2002.asc
und fügen Sie ihn ~/.gnupg/trustedkeys.gpg hinzu (was
standardmässig von von gpgv benutzt wird)
/etc/apt/sources.list, die nicht die
"dists"-Struktur benutezn, oder ändern Sie das Skript, so dass
es mit denen auch funktioniert
#!/bin/bash
# This script is copyright (c) 2001, Anthony Towns
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
rm -rf /tmp/apt-release-check
mkdir /tmp/apt-release-check || exit 1
cd /tmp/apt-release-check
>OK
>MISSING
>NOCHECK
>BAD
arch=`dpkg --print-installation-architecture`
am_root () {
[ `id -u` -eq 0 ]
}
get_md5sumsize () {
cat "$1" | awk '/^MD5Sum:/,/^SHA1:/' |
MYARG="$2" perl -ne '@f = split /\s+/; if ($f[3] eq $ENV{"MYARG"}) { print "$f[1] $f[2]\n"; exit(0); }'
}
checkit () {
local FILE="$1"
local LOOKUP="$2"
Y="`get_md5sumsize Release "$LOOKUP"`"
Y="`echo "$Y" | sed 's/^ *//;s/ */ /g'`"
if [ ! -e "/var/lib/apt/lists/$FILE" ]; then
if [ "$Y" = "" ]; then
# No file, but not needed anyway
echo "OK"
return
fi
echo "$FILE" >>MISSING
echo "MISSING $Y"
return
fi
if [ "$Y" = "" ]; then
echo "$FILE" >>NOCHECK
echo "NOCHECK"
return
fi
X="`md5sum < /var/lib/apt/lists/$FILE` `wc -c < /var/lib/apt/lists/$FILE`"
X="`echo "$X" | sed 's/^ *//;s/ */ /g'`"
if [ "$X" != "$Y" ]; then
echo "$FILE" >>BAD
echo "BAD"
return
fi
echo "$FILE" >>OK
echo "OK"
}
echo
echo "Checking sources in /etc/apt/sources.list:"
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
echo
(echo "You should take care to ensure that the distributions you're downloading"
echo "are the ones you think you are downloading, and that they are as up to"
echo "date as you would expect (testing and unstable should be no more than"
echo "two or three days out of date, stable-updates no more than a few weeks"
echo "or a month)."
) | fmt
echo
cat /etc/apt/sources.list |
sed 's/^ *//' | grep '^[^#]' |
while read ty url dist comps; do
if [ "${url%%:*}" = "http" -o "${url%%:*}" = "ftp" ]; then
baseurl="${url#*://}"
else
continue
fi
echo "Source: ${ty} ${url} ${dist} ${comps}"
rm -f Release Release.gpg
wget -q -O Release "${url}/dists/${dist}/Release"
if ! grep -q '^' Release; then
echo " * NO TOP-LEVEL Release FILE"
else
origline=`sed -n 's/^Origin: *//p' Release | head -1`
lablline=`sed -n 's/^Label: *//p' Release | head -1`
suitline=`sed -n 's/^Suite: *//p' Release | head -1`
codeline=`sed -n 's/^Codename: *//p' Release | head -1`
dateline=`grep "^Date:" Release | head -1`
dscrline=`grep "^Description:" Release | head -1`
echo " o Origin: $origline/$lablline"
echo " o Suite: $suitline/$codeline"
echo " o $dateline"
echo " o $dscrline"
if [ "${dist%%/*}" != "$suitline" -a "${dist%%/*}" != "$codeline" ]; then
echo " * WARNING: asked for $dist, got $suitline/$codeline"
fi
wget -q -O Release.gpg "${url}/dists/${dist}/Release.gpg"
sigline="`gpgv --status-fd 3 Release.gpg Release 3>&1 >/dev/null 2>&1 | sed -n "s/^\[GNUPG:\] GOODSIG [0-9A-Fa-f]* //p"`"
if [ "$sigline" ]; then
echo " o Signed by: $sigline"
else
echo " * NO VALID SIGNATURE"
>Release
fi
fi
okaycomps=""
for comp in $comps; do
if [ "$ty" = "deb" ]; then
X=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/binary-${arch}/Release" | sed 's,//*,_,g'`" "${comp}/binary-${arch}/Release")
Y=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/binary-${arch}/Packages" | sed 's,//*,_,g'`" "${comp}/binary-${arch}/Packages")
if [ "$X $Y" = "OK OK" ]; then
okaycomps="$okaycomps $comp"
else
echo " * PROBLEMS WITH $comp ($X, $Y)"
fi
elif [ "$ty" = "deb-src" ]; then
X=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/source/Release" | sed 's,//*,_,g'`" "${comp}/source/Release")
Y=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/source/Sources" | sed 's,//*,_,g'`" "${comp}/source/Sources")
if [ "$X $Y" = "OK OK" ]; then
okaycomps="$okaycomps $comp"
else
echo " * PROBLEMS WITH component $comp ($X, $Y)"
fi
fi
done
[ "$okaycomps" = "" ] || echo " o Okay:$okaycomps"
echo
done
echo "Results"
echo "~~~~~~~"
echo
allokay=true
cd /tmp/apt-release-check
diff <(cat BAD MISSING NOCHECK OK | sort) <(cd /var/lib/apt/lists && find . -type f -maxdepth 1 | sed 's,^\./,,g' | grep '_' | sort) | sed -n 's/^> //p' >UNVALIDATED
cd /tmp/apt-release-check
if grep -q ^ UNVALIDATED; then
allokay=false
(echo "The following files in /var/lib/apt/lists have not been validated."
echo "This could turn out to be a harmless indication that this script"
echo "is buggy or out of date, or it could let trojaned packages get onto"
echo "your system."
) | fmt
echo
sed 's/^/ /' < UNVALIDATED
echo
fi
if grep -q ^ BAD; then
allokay=false
(echo "The contents of the following files in /var/lib/apt/lists does not"
echo "match what was expected. This may mean these sources are out of date,"
echo "that the archive is having problems, or that someone is actively"
echo "using your mirror to distribute trojans."
if am_root; then
echo "The files have been renamed to have the extension .FAILED and"
echo "will be ignored by apt."
cat BAD | while read a; do
mv /var/lib/apt/lists/$a /var/lib/apt/lists/${a}.FAILED
done
fi) | fmt
echo
sed 's/^/ /' < BAD
echo
fi
if grep -q ^ MISSING; then
allokay=false
(echo "The following files from /var/lib/apt/lists were missing. This"
echo "may cause you to miss out on updates to some vulnerable packages."
) | fmt
echo
sed 's/^/ /' < MISSING
echo
fi
if grep -q ^ NOCHECK; then
allokay=false
(echo "The contents of the following files in /var/lib/apt/lists could not"
echo "be validated due to the lack of a signed Release file, or the lack"
echo "of an appropriate entry in a signed Release file. This probably"
echo "means that the maintainers of these sources are slack, but may mean"
echo "these sources are being actively used to distribute trojans."
if am_root; then
echo "The files have been renamed to have the extension .FAILED and"
echo "will be ignored by apt."
cat NOCHECK | while read a; do
mv /var/lib/apt/lists/$a /var/lib/apt/lists/${a}.FAILED
done
fi) | fmt
echo
sed 's/^/ /' < NOCHECK
echo
fi
if $allokay; then
echo 'Everything seems okay!'
echo
fi
rm -rf /tmp/apt-release-check
Anleitung zum Absichern von Debian
2.5 (beta) 20 septiembre 2003Sat, 17 Aug 2002 12:23:36 +0200jfs@computer.org