config.h File Reference

Go to the source code of this file.

Data Structures
struct	ast_comment
struct	ast_variable
Functions
ast_config *	ast_load (char *configfile)
	Load a config file.
void	ast_destroy (struct ast_config *config)
	Removes a config.
char *	ast_category_browse (struct ast_config *config, char *prev)
	Goes through categories.
ast_variable *	ast_variable_browse (struct ast_config *config, char *category)
	Goes through variables.
char *	ast_variable_retrieve (struct ast_config *config, char *category, char *value)
	Gets a variable.
int	ast_true (char *val)
	Make sure something is true.
int	ast_category_exist (struct ast_config *config, char *category_name)
	Check for category duplicates.
ast_variable *	ast_variable_append_modify (struct ast_config *cfg, char *category, char *variable, char *newvalue, int newcat, int newvar, int move)
int	ast_category_delete (struct ast_config *cfg, char *category)
int	ast_variable_delete (struct ast_config *cfg, char *category, char *variable, char *value)
int	ast_save (char *filename, struct ast_config *cfg, char *generator)

---

Function Documentation

char* ast_category_browse (  struct ast_config *  config, char *  prev )

Goes through categories. Parameters: config  Which config file you wish to "browse" prev  A pointer to a previous category. This funtion is kind of non-intuitive in it's use. To begin, one passes NULL as the second arguement. It will return a pointer to the string of the first category in the file. From here on after, one must then pass the previous usage's return value as the second pointer, and it will return a pointer to the category name afterwards. Note: If you manually strcpy a string into a character array and pass it thinking it will return your category, it will not; the comparisons are not done doing strcmp, they are done by checking whether the value of the string POINTER is the same. Returns a category on success, or NULL on failure/no-more-categories Definition at line 773 of file config.c. References ast_category::name, ast_category::next, and ast_config::root. { struct ast_category *cat; if (!prev) { if (config->root) return config->root->name; else return NULL; } cat = config->root; while(cat) { if (cat->name == prev) { if (cat->next) return cat->next->name; else return NULL; } cat = cat->next; } cat = config->root; while(cat) { if (!strcasecmp(cat->name, prev)) { if (cat->next) return cat->next->name; else return NULL; } cat = cat->next; } return NULL; }

int ast_category_delete (  struct ast_config *  cfg, char *  category )

int ast_category_exist (  struct ast_config *  config, char *  category_name )

Check for category duplicates. Parameters: config  which config to use category_name  name of the category you're looking for This will search through the categories within a given config file and search for a match. The passed category_name can be a regular string (as opposed to a pointer of an existent string, lol) Browse config structure and check for category duplicity Return non-zero if found Definition at line 397 of file config.c. References ast_category::next, and ast_config::root. { struct ast_category *category = NULL; category = config->root; while(category) { if (!strcasecmp(category->name,category_name)) return 1; category = category->next; } return 0; }

void ast_destroy (  struct ast_config *  config  )

Removes a config. Parameters: config  config data structure associated with the config. Free memory associated with a given config Returns nothing Definition at line 81 of file config.c. References free, ast_category::root, and ast_config::root. Referenced by ast_enum_init(), ast_load_resource(), ast_rtp_reload(), init_manager(), and load_modules(). { struct ast_category *cat, *catn; struct ast_variable *v, *vn; if (!ast) return; cat = ast->root; while(cat) { v = cat->root; while(v) { vn = v; free(v->name); free(v->value); #ifdef PRESERVE_COMMENTS free_comments(v->precomments); free_comments(v->sameline); #endif v = v->next; free(vn); } catn = cat; #ifdef PRESERVE_COMMENTS free_comments(cat->precomments); free_comments(cat->sameline); #endif cat = cat->next; free(catn); } #ifdef PRESERVE_COMMENTS free_comments(ast->trailingcomments); #endif free(ast); }

struct ast_config* ast_load (  char *  configfile  )

Load a config file. Parameters: configfile  path of file to open. If no preceding '/' character, path is considered relative to AST_CONFIG_DIR Create a config structure from a given configuration file. Returns NULL on error, or an ast_config data structure on success Definition at line 759 of file config.c. Referenced by ast_enum_init(), ast_load_resource(), ast_rtp_reload(), init_manager(), and load_modules(). { struct ast_category *tmpc=NULL; struct ast_variable *last = NULL; #ifdef PRESERVE_COMMENTS struct ast_comment_struct acs = { NULL, NULL }; #endif return __ast_load(configfile, NULL, &tmpc, &last, 0 #ifdef PRESERVE_COMMENTS ,&acs #endif ); }

int ast_save (  char *  filename, struct ast_config *  cfg, char *  generator )

Definition at line 612 of file config.c. References AST_CONFIG_DIR, ast_verbose(), option_debug, option_verbose, ast_config::root, and VERBOSE_PREFIX_2. { FILE *f; char fn[256]; char date[256]; time_t t; struct ast_variable *var; struct ast_category *cat; int blanklines = 0; if (configfile[0] == '/') { strncpy(fn, configfile, sizeof(fn)-1); } else { snprintf(fn, sizeof(fn), "%s/%s", AST_CONFIG_DIR, configfile); } time(&t); strncpy(date, ctime(&t), sizeof(date)); if ((f = fopen(fn, "w"))) { if ((option_verbose > 1) && !option_debug) ast_verbose( VERBOSE_PREFIX_2 "Saving '%s': ", fn); fprintf(f, ";!\n"); fprintf(f, ";! Automatically generated configuration file\n"); fprintf(f, ";! Filename: %s (%s)\n", configfile, fn); fprintf(f, ";! Generator: %s\n", generator); fprintf(f, ";! Creation Date: %s", date); fprintf(f, ";!\n"); cat = cfg->root; while(cat) { #ifdef PRESERVE_COMMENTS /* Dump any precomments */ dump_comments(f, cat->precomments); #endif /* Dump section with any appropriate comment */ #ifdef PRESERVE_COMMENTS if (cat->sameline) fprintf(f, "[%s] ; %s\n", cat->name, cat->sameline->cmt); else #endif fprintf(f, "[%s]\n", cat->name); var = cat->root; while(var) { #ifdef PRESERVE_COMMENTS dump_comments(f, var->precomments); #endif if (var->sameline) fprintf(f, "%s %s %s ; %s\n", var->name, (var->object ? "=>" : "="), var->value, var->sameline->cmt); else fprintf(f, "%s %s %s\n", var->name, (var->object ? "=>" : "="), var->value); if (var->blanklines) { blanklines = var->blanklines; while (blanklines) { fprintf(f, "\n"); blanklines--; } } var = var->next; } #if 0 /* Put an empty line */ fprintf(f, "\n"); #endif cat = cat->next; } #ifdef PRESERVE_COMMENTS dump_comments(f, cfg->trailingcomments); #endif } else { if (option_debug) printf("Unable to open for writing: %s\n", fn); else if (option_verbose > 1) printf( "Unable to write (%s)", strerror(errno)); return -1; } fclose(f); return 0; }

int ast_true (  char *  val  )

Make sure something is true. Determine affermativeness of a boolean value. This function checks to see whether a string passed to it is an indication of an affirmitave value. It checks to see if the string is "yes", "true", "y", "t", and "1". Returns 0 if the value of s is a NULL pointer, 0 on "truth", and -1 on falsehood. Definition at line 117 of file config.c. References s. Referenced by ast_load_resource(), init_manager(), and load_modules(). { if (!s) return 0; /* Determine if this is a true value */ if (!strcasecmp(s, "yes") || !strcasecmp(s, "true") || !strcasecmp(s, "y") || !strcasecmp(s, "t") || !strcasecmp(s, "1")) return -1; return 0; }

struct ast_variable* ast_variable_append_modify (  struct ast_config *  cfg, char *  category, char *  variable, char *  newvalue, int  newcat, int  newvar, int  move )

struct ast_variable* ast_variable_browse (  struct ast_config *  config, char *  category )

Goes through variables. Somewhat similar in intent as the ast_category_browse. The category MUST be an actual pointer to an actual category (such as one obtained by using ast_category_browse()). List variables of config file Returns ast_variable list on success, or NULL on failure Definition at line 131 of file config.c. References ast_variable::next, ast_category::root, and ast_config::root. Referenced by ast_enum_init(), ast_variable_retrieve(), and load_modules(). { struct ast_category *cat; cat = config->root; while(cat) { if (cat->name == category) return cat->root; cat = cat->next; } cat = config->root; while(cat) { if (!strcasecmp(cat->name, category)) return cat->root; cat = cat->next; } return NULL; }

int ast_variable_delete (  struct ast_config *  cfg, char *  category, char *  variable, char *  value )

char* ast_variable_retrieve (  struct ast_config *  config, char *  category, char *  value )

Gets a variable. Parameters: config  which (opened) config to use category  category under which the variable lies (must be a pointer to the category, such as one given by ast_category_browse) value  which variable you wish to get the data for Goes through a given config file in the given category and searches for the given variable Returns the variable value on success, or NULL if unable to find it. Retrieve a specific variable Definition at line 149 of file config.c. References ast_variable_browse(), ast_category::root, ast_config::root, and ast_variable::value. Referenced by ast_load_resource(), ast_rtp_reload(), init_manager(), and load_modules(). { struct ast_variable *v; if (category) { v = ast_variable_browse(config, category); while (v) { if (value == v->name) return v->value; v=v->next; } v = ast_variable_browse(config, category); while (v) { if (!strcasecmp(value, v->name)) return v->value; v=v->next; } } else { struct ast_category *cat; cat = config->root; while(cat) { v = cat->root; while (v) { if (!strcasecmp(value, v->name)) return v->value; v=v->next; } cat = cat->next; } } return NULL; }

---