^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: cdrom: This disc doesn't have any tracks I recognize!$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: hd[a-z]+: (ATAPI reset complete|drive not ready for command)$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: Uniform CD-ROM driver Revision: [0-9]\.[0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: eth[0-9]+: no IPv6 routers present$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: IPv6 over IPv4 tunneling driver$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: NET: Registered protocol family [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: spurious 8259A interrupt: IRQ7\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: icmpv6: msg of unknown type$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: i2c_adapter i2c-0: sendbytes: error - bailout\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: msp34xx: I/O error #1 \((read|write) 0x[0-9a-fA-F]+/0x[0-9a-fA-F]+\)$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: eth[0-9]: New link status: AP (In|Out of) Range \([0-9]+\)$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: eth[0-9]: New link status: (Disconnected|Connected) \([0-9]+\)$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: REJECT input_ext IN=[[:alnum:]]+ OUT= MAC=.*$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ input.agent\[[0-9]+\]:[[:space:]]+evdev: already loaded$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ input.agent\[[0-9]+\]:[[:space:]]+evdev: loaded sucessfully$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: eth[0-9]+: Media Link (Off|On [0-9]+mbps (full|half)-duplex)$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: [0-9A-z]+: module license '[0-9A-z]+' taints kernel\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ISO 9660 Extensions: Microsoft Joliet Level [0-3]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ISO 9660 Extensions: [_[:alnum:]]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: agpgart: Found an AGP [0-9.]+ compliant device at [0-9:.]+\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: agpgart: Putting AGP V[0-9] device at [0-9:.]+ into [0-9]x mode$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: hub [0-9]+-[0-9]+:[0-9]+\.[0-9]+: over-current change on port [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: usb [0-9]+-[0-9]+: new full speed USB device using address [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: usb [0-9]+-[0-9]+: USB disconnect, address [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: Node changed: [-:0-9]+ -> [-:0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: Node (suspended|resumed): ID:BUS\[[-:0-9]+\]  GUID\[[0-9a-f]+\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: The root node is not cycle master capable; selecting a new root node and resetting\.\.\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: Error parsing configrom for node [-:0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: sbp2: Logged into SBP-2 device$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: ieee1394: Node [:0-9\-]+ Max speed \[S[0-9]+\] - Max payload \[[0-9]+\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: XFS mounting filesystem [[:alnum:]]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: Ending clean XFS mount for filesystem: [[:alnum:]]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: scsi2 : SCSI emulation for IEEE-1394 SBP-2 Devices$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: sr[0-9]+: [^[:space:]]+ drive: [ \/[:alnum:]]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: +Vendor: [^[:space:]]+ +Model: [^[:space:]]+ [^[:space:]]+ +Rev: +[0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: +Type: +[^[:space:]]+ +ANSI SCSI revision: [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: Attached scsi CD-ROM sr[0-9]+ at scsi[0-9], channel [0-9], id [0-9], lun [0-9]+$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ scsi.agent\[[0-9]+\]: cdrom at [\./:[:alnum:]-]+$
# for sun machines
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: sunmouse: Successfully adjusted to [0-9]+ baud\.$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: btaudio: driver version [0-9.]+ loaded \[digital\+analog\]$
^\w{3} [ :0-9]{11} [._[:alnum:]-]+ kernel: eth[0-9]: tx interrupt but no status$
